Why Does My Chainsaw Leak Bar Oil When Not In Use?

Why does my chainsaw leak oil when not in use?

In all but very exceptional cases there is nothing wrong with the chainsaw and what appears to be an oil leak is simply oil that has sprayed from the chain as it rotates at high speed, draining from the saw body and guide bar.


Can you run a chainsaw without bar oil?

Running a chainsaw without bar oil will cause mechanical problems, and some serious safety issues, such as: Kickback. Chain breaking. Dulls the chain.

How does chainsaw bar Oiler work?

Specially engineered chainsaw bar oil goes into the oil reservoir. … As you throttle up, a worm drive engages the pump to send oil through a port that releases onto the bar. As the chain moves across the bar, it distributes the oil across the surface, reducing the friction and the heat that occurs when cutting.

Should I run my chainsaw dry?

Never run your chainsaw dry. You should instead use a quality gas stabilizer. A stabilizer will keep your fuel fresh and protect your fuel system from damage caused by stale gas.

How do you store a chainsaw in the garage?

Chainsaw storage tipsStep one of storing your chainsaw, whether it will be in a garage or other storage area, is to completely empty the fuel tank.Take the cover off your chainsaw, and remove the chainsaw bar and chain.More items…•

How do I fix the oiler on my Stihl chainsaw?

To confirm if your Stihl chainsaw has an oiler problem, check the adjustment located at the bottom of the equipment first. It should have a plus and minus sign and the icon to represent the oil. Turn up the Stihl chainsaw oiler adjustment counterclockwise to increase the oil. Hold the machine up and start the throttle.

What type of oil is chainsaw bar oil?

Rapeseed-based (usually called canola) oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable-based oils are triglycerides or natural esters that come from agricultural crops.

Why is my Stihl chainsaw leaking bar oil?

If the unit continues to seep oil after a few days, the problem may be the vacuum relief valve located in the side of the engine housing between the oil output hole and the bar stud(s). … This should re-seal the orifice and keep the oil from seeping from the output hole when the saw is stored.

Why does my chainsaw chain dull so quickly?

You may be putting to steep of an angle on the cutters, which will dull quickly. You’re rakers may be too far down, which will contribute to a quick dulling chain. You may be cutting dirty wood. You may be slightly touching the ground with the tip of the bar.

Is it OK to hang a chainsaw?

Re: Hanging chainsaws Seriously, there’s really no problem with storing them that way. Only thing I’d suggest is don’t do it with the fluids full or close to full. In that position the tank vents could be blocked off and the saw may start weeping bar oil or fuel as the temp goes up and down.

How much bar oil should a chainsaw use?

When to Oil Gas chainsaws use about one tank of bar and chain oil for every tank of fuel, so fill the reservoir every time you fill the tank.

How do you stop an oil leak?

Oil Leak Repairs At Home The most cost-effective and easiest place to start fixing oil leaks yourself is by using a stop leak additive such as No Leak Engine Oil Stop Leak. Once No Leak is inside your vehicle, No Leak softens and conditions rubber seals to safely stop and prevent automotive leaks.

What can I substitute for bar oil?

Canola oil is another good substitute when you don’t have access to vegetable oil. It’s able to handle high heat and protect your chainsaw bar and chain from damaging friction. That is only if you keep it well lubricated while cutting. Canola oil is also better at handling lower outdoor temperatures than vegetable oil.

Can you use a chainsaw upside down?

Flipping the bar will give the heavily-used areas some relief from wear and tear. Using upside down chainsaw bars from time to time keeps your cuts more efficient and accurate. As a bar wears out, it won’t hold a chain in place as well, and the chain will move laterally more easily.

What happens to a chainsaw without bar oil?

Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.