- Is Mahogany good for turning?
- Is Oak good for turning?
- How long does Wood need to dry before turning?
- What is a good wood lathe for beginners?
- Is Apple wood good for turning?
- Is Cedar a good wood to turn?
- Is Ash a good wood for turning?
- Can you turn fresh cut wood?
- How do you waterproof a wooden bowl?
- What is the best wood to use on a lathe?
- Can you turn pressure treated wood on lathe?
- What type of wood is good for turning?
- What is the easiest wood to turn?
- Is Pine good for wood turning?
- Is wood turning dangerous?
Is Mahogany good for turning?
The real stuff turns and finishes beautifully, but it’s open-pored compared to, say, cherry or maple, so you’ll get a different effect under finish.
Mahogany is a super turning wood…….just make sure to use breathing protection to keep the dust out of your lungs.
Remember, in a moments time, everything can change!.
Is Oak good for turning?
English oak is not a particularly difficult timber to turn. It can be fibrous and requires careful cuts with sharp tools to avoid end grain tear on faceplate work but on spindle work, it is a fairly easy timber to cut and shape. … A spray all over the lathe, chuck and tools with something like WD-40 works well.
How long does Wood need to dry before turning?
The traditional rule-of-thumb for air-drying lumber is to allow one year of drying time per inch of wood thickness; this adage obviously only takes a few of the aforementioned variables into account, but it’s at least a rough starting point in understanding the time investment required in order to properly air-dry …
What is a good wood lathe for beginners?
10 Best Wood Lathes For BeginnersPowermatic 1352001 Model 3520B 20×35-Inch Wood Lathe with RPM Digital Readout. … JET JWL-1221VS 12-Inch by 21-Inch Variable Speed Wood Lathe. … SHOP FOX W1704 1/3-Horsepower Benchtop Lathe. … Delta Industrial 46-460 12-1/2-Inch Variable-Speed Midi Lathe.More items…•
Is Apple wood good for turning?
Any fruit wood is good for turning, that includes fruit bearing woods found in the hedgerow. They can be prone to cracking if dried too quickly.
Is Cedar a good wood to turn?
Cedar is a nice wood to turn but it is soft. I’ve got a cedar bowl on my lathe now finishing it up. It’s going to be very nice. Just be careful and use sharp tools.
Is Ash a good wood for turning?
Ash is also our toughest timber in terms of tensile strength; its only weakness being that it is not durable outside but for turning vases, platters, bowls and all types of spindle work, including tool handles, it is a superb timber.
Can you turn fresh cut wood?
Turning freshly cut timber, full of sap and the colours looking really bright, is a great pleasure. It gives great opportunities in almost every way. … You can combine dramatic natural colour contrasts from dark hard wood through to light sap wood, to a rim of dark bark. And the cost of the wood can be negligible.
How do you waterproof a wooden bowl?
You can also buy odorless epoxy. If it is for your own use, I would use Polymerized Tung Oil, it is water resistant (not water proof) you can IMO eat sloppy wet food out of that, rinse the bowl and dry it right after the meal, it should last a long time.
What is the best wood to use on a lathe?
Reader’s Choice – Top Woods to Turn. With so much effort put into such a small piece of wood, turners are very serious about their stock. … Figured Maple. There are several types of figured maple including curl, fiddleback, spalted, tiger, birds-eye, and more. … Walnut. … Cherry. … Boxelder. … Rosewood. … Pacific Madrone. … Red Elm.More items…
Can you turn pressure treated wood on lathe?
Fundamentally you can turn with any type of wood, however it’s a good idea to stay away from anything pressure treated. … Also, no matter what type of wood you’re turning, it can cause problems if you turn a lot and inhale the dust. So it’s always a good idea to wear a mask or a respirator.
What type of wood is good for turning?
Best Woods for Turning Some of the most popular domestic hardwoods for turning include birch, ash, maple, cherry, and walnut. Exotic hardwoods are also popular for woodworking projects because of their distinct patterns and colors.
What is the easiest wood to turn?
Try the soft maple or Poplar. Those are fairly soft and should turn very well. If you still have problems then it might be the tools, how you use them, or it could even be the lathe.
Is Pine good for wood turning?
Pine is an excellent wood for beginning turners. It is a soft wood and is easy to shape on the lathe. Cutting with a gouge or skew chisel produces a better finish than a scraper when turning between centres. … You can see the cells of the wood where the cut has gone across grain in the bottom.
Is wood turning dangerous?
People can be badly injured or even killed by spinning wood. If spinning too fast, it can break up. The fragments will then fly in a straight line with all the kinetic energy given to them by the lathe motor. A key left in the chuck when the lathe is switched on will be flung out.