Question: Do You Need Deep Sockets For Lug Nuts?

Are Harbor Freight impact sockets any good?

For a rough and tough set of sockets at a great deal the Harbor Freight sockets are a great buy.

However we feel for a few bucks more you can get a much nicer set like the Tekton’s that include the laser etching and storage case..

How long are deep sockets?

around one inchA deep socket will generally be around one inch long. This will allow you to use a socket wrench in inaccessible places, especially if you have an extension on the driver.

Should you use an impact wrench to tighten lug nuts?

When loosening a lug nut you’ll notice the socket attached to the impact wrench moving slowly as the lug nut is loosened and then quickly when it’s loose. Be cautious when tightening lug nuts using an impact as it’s easy to over torque them—which can stretch or even strip the threads.

Should I get shallow or deep impact sockets?

If money is a concern at first, just get the deep wells and get the shallow later. End of the day, a deep socket will remove what a shallow one could but a shallow one can’t magically grow to clear what needs a deep.

Will a cordless impact wrench remove lug nuts?

You can remove lug nuts of your car using an impact driver provided the nuts are tightened at the right amount of torque (80 to 100lb-ft) and your impact driver’s output torque is higher than 100lb-ft. In practice, however, rusted/frozen and over-torqued lug nuts will not break loose with a cordless impact driver.

Can a torque wrench be used to loosen bolts?

How to use torque wrenches ? A torque wrench is a tightening tool. It is a very sensitive and precise tightening tool, and should never been used to loosen bolts. Handle your torque wrench as carefully as you treat a measurement instrument!

What size socket are lug nuts?

Complete with the most popular sizes that fit most lug nuts. Set includes 1/2 inch drive socket sizes 13/16, 7/8, 3/4, 15/16 inch and 17 and 19 mm. Also includes 6 inch extension bar. Wt.

Can I use a drill to take off lug nuts?

No, this will NOT work to remove lug nuts. An impact driver would be required for that. … The impact is designed to bang loose the lug nuts (if they were not over-torqued). And sometimes even the cordless impact drill won’t bang loose the lug nuts…

Should I buy 6 or 12 point sockets?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners.

What is the difference between a deep and shallow sockets?

deep sockets: Imagine a nut that, when fully tightened, sits an inch below the top of the bolt or stud it attaches to. A normal, shallow socket may not even touch the nut before the top of the stud or bolt hits the end of the socket.

How do you loosen a lug nut that won’t budge?

The least labor-intensive way to break a rusty lug nut free is by soaking it in a product like WD-40, PB Blaster or some other oil-based lubricant. Spray it at the base of the nut and wait, as long as you can, for the oil to work its way through the threads and between the nut and the metal of your hub.

How tight should lug nuts be?

New wheels should be re-torqued after the first 50 to 100 driving miles.Hardware Bolt or Stud SizeTypical Torque Range in Ft/LbsMinimum Number of Turns of Hardware Engagement12 x 1.5 mm70 – 806.512 x 1.25 mm70 – 80814 x 1.5 mm85 – 907.514 x 1.25 mm85 – 9093 more rows

Can a 3/8 impact wrench remove lug nuts?

So, pick a 3/8-inch impact wrench or a 1/2-inch impact wrench, which is an even better choice. These are considered to be the best sizes as they are powerful enough to handle even the toughest nuts without applying too much torque. 3/8-inch and 1/2-inch sizes will offer smooth experience in removing lug nuts.

Do you really need deep sockets?

Deep sockets are better for specific jobs instead of general use. If you have bolted joints, they make a much better option for your socket wrench than shallow sockets. Because the length of the bolt means the nut will need to go further into the socket, deep sockets are a much better choice. …

What do you use to get lug nuts off?

Use the lug wrench to loosen the lug nuts on the wheel with the flat tire. Use the jack to lift the wheel off of the ground. Remove the lug nuts that you loosened prior to using the jack by using the lug wrench. Lower the vehicle off of the jack by turning the handle in a counter clockwise fashion.

Can you over tighten lug nuts by hand?

The problem with impact guns is they’re so powerful, one can easily over-tighten the nuts. A torque wrench measures the tightening force applied, allowing the user to accurately follow the manufacturer’s recommendations. If your lug nuts were tightened by hand I wouldn’t be too concerned.

Will impact wrench break bolts?

Does using an impact wrench instead of a breaker bar prevent damaging to nuts or bolts? … The mechanic explained that sometimes lug nuts are highly over-torqued because all shops use impact gun to tighten them, but does not cause any problems as long as they are opened using an impact wrench.

How many pounds of torque do I need to remove lug nuts?

A quick glance at a lug nut torque chart shows that most lug nuts should be torqued between 80 and 100 ft-lbs. Some require less torque, others more.